2017 Good Quality Graphite Mould For Exothermic Welding - Top Quality Brass Lightning Arrester Rod – ShiBang
2017 Good Quality Graphite Mould For Exothermic Welding - Top Quality Brass Lightning Arrester Rod – ShiBang Detail:
- Place of Origin:
-
Zhejiang, China (Mainland)
- Brand Name:
-
SHIBANG
- Item:
-
Brass Lightning Arrester Rod
- Material:
-
Pure copper or copper clad steel
- Air rod height:
-
<=200M
- Protection angle:
-
65 degree
- Corrsponding protection radius:
-
2.14h
- The hx height from ground:
-
2.14(h-hx)
- Current gradient:
-
less than 5KA
- Average discharge current:
-
less than 7KA
- Grounding resistance:
-
less than 10 ohm
- Resistible wind speed:
-
over 50m/s
- Supply Ability:
- 100000 Piece/Pieces per Month
- Packaging Details
- wooden carton + pallet for Brass Lightning Arrester Rod.
- Port
- SHANGHAI/NINGBO
| Item | Brass Lightning Arrester Rod |
| Material | Pure Copper or Copper Coated Stainless Steel |
| Length | 0.5M/0.75M or As Your Request |
| Diameter | 12mm; 13mm; 13.5mm; 14mm; 15mm |
| Corrsponding protection radius | 2.14h |
| The hx height from ground | 2.14(h-hx) |
| Current gradient | less than 5KA |
| Average discharge current | less than 7KA |
| Grounding resistance | less than 10 ohm |
| Resistible wind speed | over 50m/s |
|
Brass Lightning Arrester Rod is used for protecting the buildings to avoid lightning strike. Lightning rod grounding plays an important part of the air termination network of a lightning protection system.We are professional lightning rod manufacturer. Building Lightning Rod,alternate named lightning protection devices,used for protecting the building when raining and lightning .The lightning rod installed on the building and transfer the electric to earthing metal to protect the building . Our SLE lightning rod comply with GB standard . Customized lightning rod available |
|
1. Winding:There is a large protection area without winding. For example, when the winding rate less than 0.001%, (Apparently at such circumstance, the object protected has little opportunity to be winded.) and the protection up to 55 ° angle, compared to the traditional real lightning rod, controllable discharging lighting rod almost has no opportunity to be winded. 2. Scope of protection: When the protected object attacked by around 0.1%, (currently a point of order under the allowable value), controllable discharging lighting rod up to 66.4 ° angle, but traditional lightning rod is much more smaller than that. (Take the traditional lightning rod is more economical at strong intensive thunder area, while there still has opportunity that be struck by lighting). 3. Efficiency and application prospects: Controllable lightning rod is a widely used protection device with wide application prospects, with a high using value. |
| 1. | IQC(Incoming Check) |
| 2. | IPQC(Process Quality Control |
| 3. | First Piece Quality Control |
| 4. | Mass Products Quality Control |
| 5. | OQC(Outgoing Quality Control) |
| 6. | FQC(Final Quality Check) |
|
XINCHANG SHIBANG NEW MATERIAL CO., LTD is one of the first-classed manufactures which integrated research and development and sales of lighting protection facility. SHIBANG is concentrating on producing lighting rods, nonmagnetic earth rod, copper clad steel ground rod, graphite ground module, chemical electrolytic ground pole, copper bonded steel tape, copper bonded stranded wire, copper busbar, all kinds of earthing clamps, exothermic welding mold and powder etc.
SHIBANG is located in Xinchang city, Zhejiang province, which is famous for tourism, north to Shanghai and east to Ningbo makes the transportation very convenient. With the complete and scientific management system, company has got approvals from worldwide clients on products quality and reputation. Welcome to vist SHIBANG, we are waiting for cooperation with your esteemed company from all over the world. |
| 1. | Providing Professional Advises & Operation |
| 2. | Customer Service Online with 24 Hours |
| 3. | Full Inspection On All The Products Before Shipement |
| 4. | Free Logo Embossing |
| 5. | Shipping &Price Term: EXW;FOB;CIF;DDU |
| 6. | OEM & ODM Are all Available |
| 1. | Professional Operation Experience |
| 2. | The Sizes All Can Be Customised |
| 3. | Sample For Your Reference Available |
| 4. | Low MOQ, Low Price |
| 5. | Safe Packing & Prompt Delivery |
| 6. | Quality Guaranted: ISO9001:2008, UL, All Kinds of Test |
Product detail pictures:
Related Product Guide:
We believe in: Innovation is our soul and spirit. High-quality is our life. Consumer need to have is our God for 2017 Good Quality Graphite Mould For Exothermic Welding - Top Quality Brass Lightning Arrester Rod – ShiBang, The product will supply to all over the world, such as: Malaysia, Oslo, British, Our factory is equipped with complete facility in 10000 square meters, which makes us be able to satisfy the producing and sales for most auto part products. Our advantage is full category, high quality and competitive price! Based on that, our products win a high admiration both at home and abroad.
By Cara from Saudi Arabia - 2018.11.02 11:11
The customer service staff is very patient and has a positive and progressive attitude to our interest, so that we can have a comprehensive understanding of the product and finally we reached an agreement, thanks!
By Molly from Munich - 2017.05.21 12:31
